NORMAL TOLERANCES ARE AS FOLLOWS:

  • 3/16″ OR 1/4″ GLASS – +/- 1/8″
  • 3/8″ GLASS – +/- 3/16″
  • 1/2″ GLASS – +/- 1/4″
  • 3/4″ GLASS – +/- 3/8″

1. HEAVY BROWN OR WHITE PAPER OR CARDBOARD ARE ACCEPTABLE FOR STANDARD TOLERANCE. 
2. ONE PIECE PATTERNS PREFERRED. TOLERANCE IS GREATER IF MORE THAN ONE PIECE PATTERN. 
3. MAGIC MARKER, BLUE & BLACK INK PENS OR LEAD PENCIL FOR DRAWING OF PATTERNS. PLEASE NOTE INSIDE OR OUTSIDE OF LINE AND WHETHER PATTERN IS FACE UP OR FACE DOWN DEPENDING ON TYPE OF EDGEWORK. NO YELLOW LINES OR LIGHT COLORED PENCILS. 
4. TOLERANCES MAY BE GREATER ON PATTERNS DEPENDING ON SHAPE. 
5. PLEASE DO NOT WRITE DIMENSIONS ON FULL SIZE PATTERNS. EITHER A FULL PATTERN OR A DIMENSIONED DRAWING ARE PREFERED NOT A COMBINATION OF BOTH.

NOTE: WE ARE NOT RESPONSIBLE FOR ADDING OR SUBTRACTING FROM PATTERNS!!!!!.

MUST NOTE IF OUT OF SQUARE AND HOW MUCH- UNLESS SENDING HARD BOARD PATTERN CUTOUTS & NOTCHES WILL HAVE MINIMUM OF 3/8″ RADIUS IN CORNERS AND SATIN EDGE IN THESE AREAS UNLESS OTHERWISE NOTED.

TIGHT TOLERANCE:

  • 1. MASONITE, PLYWOOD, PLASTIC AND GLASS ARE ACCEPTED AS HARDBOARD PATTERNS. GLASS IS ACCEPTED ONLY AT THE CUSTOMERS OWN RISK.
    NOTE: MARK FACE UP DEPENDING ON TYPE OF EDGEWORK.
  • 2. PATTERNS MUST BE MADE AS ACCURATE AS YOU EXPECT GLASS TO BE.
  • 3. NO GUARANTEE ON DROP-IN PATTERNS.

UNACCEPTABLE PATTERNS ARE:

Any light weight paper/material such as

  • NEWSPAPER
  • TABLECLOTH
  • WRAPPING PAPER
  • TISSUE PAPER MATERIAL
  • ETC, ETC, ETC

Custom Shower Doors

– Created to your specifications from cutout and hole placement to edgework. We are able to fabricate non-straight and curved sides also.

Dual Sealed Insulated Units

– Minimum Size 14″x7″ – Max Size 78″x98″ See Here

Edgework

– Flat, Pencil, Bevel, O.G., Triple Pencil (Waterfall), Barked, Mitre

Shaped Glass

– Ovals, Diameters, Triangles ETC.

Tempering

– In house Tempering. 1/8″ Thru 3/4″ Glass, Shower Enclosures, Counter Tops, Sink Tops ETC. Click here for more information on Tempering

OUR MAX FURNACE SIZE IS 58″1/2 X 118″

Glass Tops

– Up to 3/4″ Thick and to your specifications. Boxed Window Glass- 2.3mm, Powder Packed in 50sq. ft. Boxes for framing and window repair.

Float Glass

– Single Strength thru 3/4″ Thick

Gunter Mirror Mastic

Screen Wire/Pet Screen

– All 100Ft. Rolls

  • -Widths (Screen Wire) (Aluminum, Black/Charcoal Aluminum, Charcoal Fiberglass) 
    -18″, 20″, 22″, 24″, 26″, 28″, 30″, 32″, 34″, 36″, 38″, 40″, 42″,48″, 54″, 60″, 72″
  • -Widths (Black Pet Screen)
    -36″, 48″

Custom Cut Sizes

Stock Size Mirrors

– See Here

Mirror Strips

Frameless Mirrors

– Ovals, Circles Etc.

V-Grooves

– 5/32″, 1/4″, 3/8″, 1/2″ Wide

Plate Grooves

– 1/4″ Wide